MODEL GV25C / TECHNICAL DATA
Explore GV25C curved guide rails with 5 catalogue model sizes, dimensional drawings and custom track assembly review. Request a SANJ quotation.
CUSTOM MANUFACTURING / ENGINEERING REVIEW
GV25C v-profile curved guide rails with 5 catalogue diameters and 90°, 180° or 360° arc options. Configure the rail, carriage and mounting interface for your machine.
CATALOGUE & PROJECT REFERENCE
Read the source drawing and dimensional symbols together. Final dimensions, material and operating targets are agreed for the selected assembly.
| Field | Specification |
|---|---|
| Model / series | GV25C |
| Guide profile | V-profile |
| Profile width | 25 mm |
| Catalogue D range | 200–400 mm |
| h | 10 mm |
| H | 12.5 mm |
| Arc coverage | 90° / 180° / 360° |
| Custom scope | Layout, interface, assembly and operating requirement review |
DRAWING-LED SELECTION
Include the fixture mass, centre of gravity, station forces, move and dwell times, mounting orientation and working environment.
Technical reference: Product catalogue, page 14. Catalogue dimensions support selection; they are not a complete system load or accuracy rating.
Dimensions & enquiry checklist →| Model | D | B | A | h | H | Arc options | X | Y | Z | n*H | Source note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GV25C-200 | 200 | 175 | 225 | 10 | 12.5 | 90° / 180° / 360° | 6 | 9 | 30 | 10*M5 | |
| GV25C-255 | 255 | 230 | 280 | 10 | 12.5 | 90° / 180° / 360° | 6 | 9 | 30 | 10*M5 | |
| GV25C-300 | 300 | 275 | 325 | 10 | 12.5 | 90° / 180° / 360° | 6 | 9 | 30 | 10*M5 | |
| GV25C-351 | 351 | 326 | 376 | 10 | 12.5 | 90° / 180° / 360° | 6 | 9 | 30 | 10*M5 | |
| GV25C-400 | 400 | 375 | 425 | 10 | 12.5 | 90° / 180° / 360° | 6 | 9 | 30 | 10*M5 |
A dash means the source cell was blank. X, Y, Z and n*H are original drawing symbols; confirm unspecified units or hole definitions. Do not assume D is the outside diameter.
The GV25C family is a v-profile guide for circular or segmented motion. Combine suitable curved and straight sections when the application requires a closed loop. Match the carriage, joint preparation and mounting support as one assembly.
Select a listed diameter as a starting point, or send a layout for a non-standard review. Hardened working faces and precision grinding are described in the supplied product catalogue; material, finish, hole pattern and final tolerances belong on the approved drawing.
Specify the required arc angle, the diameter reference, load including fixture, process forces, mounting orientation and required positioning at the work station. A diameter alone does not establish a load rating.
GV25C-200 · GV25C-255 · GV25C-300 · GV25C-351 · GV25C-400
RELATED PRODUCTS
Catalogue imageRING & TRACK SYSTEMS
T25GR t-profile curved guide rails with 11 catalogue diameters and 90°, 180° or 360° arc options. Configure the rail, carriage and mounting interface for your machine.
View technical details →
Catalogue imageRING & TRACK SYSTEMS
T23-24 t-profile curved guide rails with 8 catalogue diameters and 90°, 180° or 360° arc options. Configure the rail, carriage and mounting interface for your machine.
View technical details →
Catalogue imageRING & TRACK SYSTEMS
GV44C v-profile curved guide rails with 2 catalogue diameters and 90°, 180° or 360° arc options. Configure the rail, carriage and mounting interface for your machine.
View technical details →FROM MOTION PATH TO PROJECT BRIEF
Share a layout, payload and operating brief. Build the enquiry around the details that matter.